| Ditch
Witch XT1600
If you want to streamline your fleet, you want
the XT1600 excavator-tool carrier, because it does
the work of a small army of equipment. It doesn’t just
excavate. It does it with a dual-pivot, 260° sweep
that can dig right alongside a wall. And it doesn’t
just move dirt. It can handle whatever you throw at
its army of quick-change attachments. Let it streamline
your fleet and your bottom line. |
 |
|
An impressive 30
hp (22 kW) to the auxiliary hydraulics allows it
to do the work of much larger machines.
Compact enough to
be hauled behind a one-ton truck and used on a
variety of jobsites.
Equalizer track system
ensures more track on the ground for a smoother
ride and easier loading and unloading.
Roomy, well-positioned
operator’s station provides exceptional comfort
and excellent visibility.
Attachment plate
accepts most full-size skid steer attachments.
Dual-pivot excavator
system with a 260° excavator sweep provides unparalleled
offset digging capability; operator can dig against
a footing or wall and dig a number of trenches
from one place.
Equipped with quick-disconnect
fittings on both the excavator (optional) and the
tool carrier, so attachments can be changed under
pressure--without shutting off the machine.
Stabilizers are standard
equipment on the XT1600, for more stability when
excavating in tough soils.
A dedicated ground
drive control lets you operate ground drive even
when you’re using the excavator.
Available with your
choice of aggressive tracks for better traction
or turf-friendly tracks for less ground pressure
and reduced jobsite restoration.
Dimensions
- Tool Carrier |
U.S. |
Metric |
Operating
height with standard bucket, max |
155
in |
3.94
m |
Hinge
pin height, max |
121
in |
3.07
m |
Dump
height with standard bucket, max |
85
in |
2.16
m |
Bucket
rollback angle, top |
60° |
60° |
Dump
angle, standard bucket |
50° |
50° |
Reach
with standard bucket, fully raised |
20
in |
508
mm |
Bucket
rollback angle, ground level |
23° |
23° |
Reach
at grade |
61
in |
1.55
m |
Wheelbase/track
length |
58
in |
1.47
m |
Overall
height of machine |
107
in |
2.72
m |
Bucket
width, max |
73
in |
1.85
m |
Width |
69
in |
1.75
m |
Overall
machine length, excavator stowed |
179
in |
4.55
m |
Weight |
9420
lb |
4272
kg |
Dimensions
- Excavator |
U.S. |
Metric |
Loading
height, max |
122
in |
3.1
m |
Dig
depth, max |
134
in |
3.4
m |
Dig
depth, 2 ft (0.6 m) flat bottom |
133
in |
3.38
m |
Reach
from swing post |
165
in |
4.19
m |
Swing
angle from center |
130° |
130° |
Total
swing angle |
260° |
260° |
Performance |
U.S. |
Metric |
Ground
drive speed, forward |
3.5/6.8
mph |
5.6/10.9
km/h |
Ground
drive speed, reverse |
3.5/6.8
mph |
5.6/10.9
km/h |
Ground
pressure |
5.8
psi |
0.4
bar |
Angle
of departure |
20° |
20° |
Tipping
capacity |
4600
lb |
2087
kg |
Rated
operating capacity |
(@ 35% of tipping capacity)
|
1600
lb |
726
kg |
Drawbar
pull |
8800
lb |
39.1
kN |
Hydraulic
System |
U.S. |
Metric |
Auxiliary:
dual gear pumps |
|
15.0/26.0
gpm |
56.7/98.4
L/min |
|
3000
psi |
206.8
bar |
Ground
drive: dual hydrostat |
|
27
gpm |
102.2
L/min |
|
4400
psi |
303.4
bar |
Power |
U.S. |
Metric |
Engine:
Kubota V2003-M-DI-TE2B |
Fuel:
Diesel |
Cooling
medium: liquid |
Injection:
direct |
Number
of cylinders: 4 |
Displacement |
112
in3 |
2.0
L |
Bore |
3.27
in |
83
mm |
Stroke |
3.64
in |
92.4
mm |
Installed
net power per SAE J1995 |
53
hp |
39.5
kW |
Gross
power per SAE J1995 |
59
hp |
44.0
kW |
Maximum
governed speed (no load) |
2800
rpm |
2800
rpm |
Fluid
Capacities |
U.S. |
Metric |
Fuel
tank |
20
gal |
75.7
L |
Engine
oil, with filter |
8
qt |
7.6
L |
Hydraulic
system |
16
gal |
60.6
L |
Battery |
SAE
reserve capacity 80 min, SAE cold crank
@ 0°
F (-18° C) 800 amp |
Specifications
are called out according to SAE recommended
practices. Specifications are general
and subject to change without notice.
If exact measurements are required, equipment
should be weighed and measured. Due to
selected options, delivered equipment
may not necessarily match that shown. |
|
 |
